Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2023-001, 26 Pages, 2023/05
JAEA-Research-2023-001.pdf:1.61MB
An accident of evaporation to dryness by boiling of high-level radioactive liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into the atmosphere. Accurate quantitative estimation of released Ru is one of the important issues for risk assessment of those facilities. To resolve this issue, an analytical approach has been developed using computer simulation programs to assess the radioactive source term from those facilities. The proposed approach consists analyses with three computer programs. At first, the simulation of boiling behavior in the HLLW tank is conducted with SHAWED code. Next step, the thermal-hydraulic behavior in the facility building is simulated with MELCOR code based on the results at the first step simulation such as flowed out mixed steam flow rate, temperature and volatilized Ru from the tank. The final analysis step is carried out for estimating amount of released radioactive materials with SCHERN computer code which simulates chemical behaviors of nitric acid, nitrogen oxide and Ru based on the condition also simulated MELCOR. Series of sample simulations of the accident at a hypothetical typical facility are presented with the data transfer between those codes in this report.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2022-011, 37 Pages, 2022/12
JAEA-Research-2022-011.pdf:2.88MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents at a fuel reprocessing plant. Two major mechanisms are expected for fission products (FPs) transfer from liquid to vapor phase. One is non-volatiles FPs transfer in the form of mists to the vapor phase in the tank, the other is volatilization of such as Ruthenium. These FPs transferred to the vapor phase in the tank could be released with water and nitric-acid mixed steam and NO
gas flow to the environment. NO is generated from denitration of nitrate fission products during dry out phase. These phenomena occurred in this accident originate from the liquid waste boiling in the tank. It is essential for the risk assessment of this accident to simulate thermo-hydraulic and chemical behaviors in the waste tank quantitatively with a versatile computer program. The SHAWED (
imulation of 
igh-level radio
ctive 
aste 
vaporation and 
ryness) has been developed to realize these requirements. In this report, detailed description of major analytical models is explained based on the features of this accident, and some simulation examples are also described for the use in an actual risk assessment.
Yamaguchi, Akinori*; Yokotsuka, Muneyuki*; Furuta, Masayo*; Kubota, Kazuo*; Fujine, Sachio*; Mori, Kenji*; Yoshida, Naoki; Amano, Yuki; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 21(4), p.173 - 182, 2022/09
Risk information obtained from probabilistic risk assessment (PRA) can be used to evaluate the effectiveness of measures against severe accidents in nuclear facilities. The PRA methods used for reprocessing facilities are considered immature compared to those for nuclear power plants, and to make the methods mature, reducing the uncertainty of accident scenarios becomes crucial. In this paper, we summarized the results of literature survey on the event progression of evaporation to dryness caused by boiling of high-level liquid waste (HLLW) which is a severe accident in reprocessing facilities and migration behavior of associated radioactive materials. Since one of the important characteristics of Ru is its tendency to form volatile compounds over the course of the event progression, the migration behavior of Ru is categorized into four stages based on temperature. Although no Ru has been released in the waste in the high temperature region, other volatile elements such as Cs could be released. Sufficient experimental data, however, have not been obtained yet. It is, therefore, necessary to further clarify the migration behavior of radioactive materials that predominantly depends on temperature in this region.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2021-013, 20 Pages, 2022/01
JAEA-Research-2021-013.pdf:2.35MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. An idea has been proposed to implement a steam condenser as an accident countermeasure. This measure is expected to prevent nitric acid steam diffusing in facility building and to increase gaseous Ru trapping ratio into condensed water. A simulation study has been carried out with a hypothetical typical facility building to analyze the efficiency of steam condenser. In this study, SCHERN computer code simulates chemical behaviors of Ru in nitrogen oxide, nitric acid and water mixed vapor based on the conditions obtained from simulation with thermal-hydraulic computer code MELCOR. The effectiveness of steam condenser has been analyzed quantitively in preventing mixed vapor diffusion and gaseous Ru trapping effect. Some issues to be solved in analytical model has been also clarified in this study.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Research 2021-005, 25 Pages, 2021/08
JAEA-Research-2021-005.pdf:2.91MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. Accurate quantitative estimation of released Ru is one of the important issues for risk assessment of those facilities. To resolve this issue, an empirical correlation equation of Ru mass transfer coefficient across the vapor-liquid surface, which can be useful for quantitative simulation of Ru mitigating behavior, has been obtained from data analyses of small-scale experiments conducted to clarify gaseous Ru migrating behavior under steam-condensing condition. A simulation study has been also carried out with a hypothetical typical facility building successfully to demonstrate the feasibility of quantitative estimation of amount of Ru migrating in the facility using the obtained correlation equation implemented in SCHERN computer code which simulates chemical behaviors of nitrogen oxide based on the condition also simulated thermal-hydraulic computer code.
Yoshida, Kazuo; Tamaki, Hitoshi; Hiyama, Mina*
JAEA-Data/Code 2021-008, 35 Pages, 2021/08
JAEA-Data-Code-2021-008.pdf:3.68MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. In addition to this, nitrogen oxides (NO
) are also released formed by the thermal decomposition of metal nitrates of fission products (FP) in HLLW. It has been observed experimentally that NOx affects to the migration behavior of Ru at the anticipated atmosphere condition in cells and/or compartments of the facility building. Chemical reactions of NO with water and nitric acid are also recognized as the complex phenomena to undergo simultaneously in the vapor and liquid phases. The analysis program, SCHERN has been under developed to simulate chemical behavior including Ru coupled with the thermo-hydraulic condition in the flow paths in the facility building. This technical guide for SCHERN-V2 presents the overview of covered accident, analytical models including newly developed models, differential equations for numerical solution, and user instructions.
Yoshida, Ryoichiro; Amano, Yuki; Yoshida, Naoki; Abe, Hitoshi
Journal of Nuclear Science and Technology, 58(2), p.145 - 150, 2021/02
Times Cited Count：2 Percentile：11.8(Nuclear Science & Technology)In the "evaporation and dryness due to the loss of cooling functions" which is one of the severe accidents at reprocessing plants in Japan, ruthenium (Ru) is possible to be released much more than other elements to the environment. This cause is considered that the volatile Ru compound can be released from high level liquid waste (HLLW) as gaseous compound in adding to the release by entrainment. It was expected that the release of the volatile Ru compound from the HLLW may be able to be restrained by coexisting nitrite ion because of its reduction power. To confirm the effect of nitrite ion on the release behavior of the volatile Ru compound, four experiments of heating the simulated HLLW (SHLLW) with setting the concentration of nitrite ion in the SHLLW as a parameter ware carried out. As a result, the release of the volatile Ru compound was seemed to be restrained by adding nitrite sodium as a source of nitrite ion under certain boiling condition. This result may contribute to improve source term analysis in the evaporation and dryness due to the loss of cooling functions.
Igarashi, Hiroshi
JAEA-Review 2020-006, 261 Pages, 2020/09
JAEA-Review-2020-006.pdf:4.42MB
A literature review was conducted on the increase in surface area of vitrified products of HLW due to the fracturing caused by cooling during glass pouring process and by mechanical impact, from the perspective of a parameter of the radionuclide release model in the performance assessment of geological disposal system studied overseas. The review was focused on the value of surface area increase factor set as a parameter in the model, the experimental work to evaluate an increase in surface area, and how the parameters on surface area were determined based on the experimental results. The surface area obtained from the experiments executed in Japan was also discussed in comparison with the overseas studies. On the basis of the investigation, the effects of various conditions on the surface area were studied, such as a diameter of vitrified product, cooling condition during and after the glass pouring, impact on vitrified products during their handling, environment after the closure of disposal facility, and others. The causes of fracturing are associated with the phenomena or events in the waste management process such as production, transport, storage, and disposal. The surface area increase factors set in the nuclide release model of the glass and their bases were reviewed. In addition, the measured values and the experimental methods for surface increase factors published so far were compared. Accordingly, the methods for measuring surface area as the bases were identified for these factors set in the models. The causes of fracturing and features of these factors were studied with respect to the relation with the waste management process. The results from the review and assessment can contribute to the expanding the knowledge for the conservative and realistic application of these factors to performance assessment, and to the developing and upgrading of safety case as a consequence.
Hiyama, Mina*; Tamaki, Hitoshi; Yoshida, Kazuo
JAEA-Data/Code 2019-006, 17 Pages, 2019/07
JAEA-Data-Code-2019-006.pdf:1.84MB
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents caused by the loss of cooling function at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. In addition to this, nitrogen oxides (NOx) are also released formed by the thermal decomposition of metal nitrates of fission products (FP) in HLLW. It has been observed experimentally that NOx affects strongly to the transport behavior of Ru at the anticipated atmosphere condition in cells and/or compartments of the facility building. Chemical reactions of NOx with water and nitric acid are also recognized as the complex phenomena to undergo simultaneously in the vapor and liquid phases. An analysis program has been developed to simulate chemical reaction coupled with the thermo-hydraulic condition in the flow paths in the facility building.
Yoshida, Kazuo; Tamaki, Hitoshi; Yoshida, Naoki; Yoshida, Ryoichiro; Amano, Yuki; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi, 18(2), p.69 - 80, 2019/06
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents at a fuel reprocessing plant. In this case, volatile radioactive materials, such as ruthenium (Ru) are released from the tanks with water and nitric-acid mixed vapor into atmosphere. In addition to this, nitrogen oxides are also released formed by the thermal decomposition of metal nitrates of fission products (FP) in HLLW. It has been observed experimentally that nitrogen oxide affects strongly to the transport behavior of Ru. Chemical reactions of nitrogen oxide with water and nitric acid are also recognized as the complex phenomena to undergo simultaneously in the vapor and liquid phases. An analysis method has been developed with coupling two types of computer codes to simulate not only thermo-hydraulic behavior but also chemical reactions in the flow paths of carrier gases. A simulation study has been also carried out with a typical facility building.
Do, V. K.; Yamamoto, Masahiko; Taguchi, Shigeo; Takamura, Yuzuru*; Surugaya, Naoki; Kuno, Takehiko
Talanta, 183, p.283 - 289, 2018/06
Times Cited Count：10 Percentile：39.09(Chemistry, Analytical)We develop a novel analytical method employing liquid electrode plasma optical emission spectrometry for measurement of total cesium in highly active liquid wastes. Limit of detection and limit of quantification are 0.005 mg/L and 0.02 mg/L, respectively. The method is validated and applied to the real samples.
Fukui, Toshiki*; Maki, Takashi*; Miura, Nobuyuki; Tsukada, Takeshi*
Genshiryoku Bakkuendo Kenkyu (CD-ROM), 23(2), p.169 - 173, 2016/12
The basic research programs for the next generation vitrification technology, which are commissioned project from Ministry of Economy, Trade and Industry of Japan, have been implemented from 2014 until 2018 for developing the advanced vitrification technology of low level wastes and high level liquid wastes.
Yamane, Yuichi; Amano, Yuki; Tashiro, Shinsuke; Abe, Hitoshi; Uchiyama, Gunzo; Yoshida, Kazuo; Ishikawa, Jun
Journal of Nuclear Science and Technology, 53(6), p.783 - 789, 2016/06
Times Cited Count：6 Percentile：43.12(Nuclear Science & Technology)The release behavior of radioactive materials from high active liquid waste (HALW) has been experimentally investigated under boiling accident conditions. In the experiments using HALW obtained through laboratory scale reprocessing, release ratio was measured for the FP nuclides such as Ru, 
Tc, Cs, Sr, Nd, Y, Mo, Rh and actinides such as 
Cm, 
Am. As a result, the release ratio was 0.20 for Ru and 1
for the FP and Ac nuclides. Ru was released into the gas phase in the form of both mist and gas. For its released amount, weak dependency was found to the initial concentration in the test solution. The release ratio decreased with the initial concentration. For other FP nuclides and actinides as non-volatile, released into the gas phase in the form of mist, the released amount increased with the initial concentration. The release ratio of Ru and NOx concentration increased with temperature of the test solutions. They were released almost at the same temperature between 200 and 300
C. Size distribution of the mist and other particle was measured.
Yoshida, Kazuo; Ishikawa, Jun; Abe, Hitoshi
Nihon Genshiryoku Gakkai Wabun Rombunshi, 14(4), p.213 - 226, 2015/12
An accident of evaporation to dryness by boiling of high level liquid waste (HLLW) is postulated as one of the severe accidents to occur caused by the loss of cooling function at a fuel reprocessing plant. In this case, some amount of fission products (FPs) will be transferred to the vapor phase in the tank, and could be released to the environment. Therefore, the quantitative estimation of transport and release behavior of FPs is one of the key issues in the assessment of the accident consequence. To resolve this issue, a systematic analysis method with computer codes has been developed based on the phenomenological behavior in boiling accident of HLLW. A simulation study demonstrated that the behaviors of liquid waste temperature and entrainment of mists were in good agreement with the experimental results during early boiling phase
Morita, Yasuji; Asakura, Toshihide; Mineo, Hideaki; Hotoku, Shinobu; Uchiyama, Gunzo
JAERI-Conf 2005-007, p.25 - 30, 2005/08
Researches on process safety of reprocessing, development of an advanced reprocessing and partitioning of high-level liquid waste(HLLW) have been conducted in NUCEF - BECKY (Back-end Fuel Cycle Key Elements Research Facility), which has alpha-gamma concrete cells and many glove-boxes. This paper presents 10 year accomplishment of the above researches and future activities to be conducted in the field of separation process development.
Yamaguchi, Isoo*; Suzuki, Shinichi; Sasaki, Yuji; Yamagishi, Isao; Matsumura, Tatsuro; Kimura, Takaumi
JAERI-Tech 2005-037, 56 Pages, 2005/07
JAERI-Tech-2005-037.pdf:2.31MB
For the development of the reprocessing of spent nuclear fuels, the solvent extraction using the mixer-settler equipment is greatly available. This method has the advantages of the treatment of the large mass of materials and continuous operations. In case of the application of the mixer-settler devise, the precise calculation using the distribution ratio of metals in order to determine the metal concentration at each stage is indispensable. This calculation is performed in the development of ARTIST process. The metal concentration in each stage of ARTIST process is calculated by the simulation using excel software equipped with counter-current equations. This method is not taken into consideration of the change of acid concentration, therefore, we developed the new method to calculate the metal concentration even after acidity change. This method can calculate not only the metal concentration at each extraction step but also at each stage of mixer-settler. Using this calculation, we evaluated the optimum condition of solvent extraction in ARTIST process.
